48 Tooth Belt-to-Chain Drive Conversion 5-Spoke Rear Chrome Sprocket

For 1973-1999 Harley Big Twin Softail, Dyna, FXR, Touring & 1986-1999 Sportster XL

Features:

• This sprocket has a 9.8mm offset (Offset is measured from the sprocket bolt mount surface to the center line of the teeth.)
• The inner diameter of the center hole is 2"
• Fits 1973-1999 Harley Big Twin Softail, Dyna, FXR, Touring & 1986-1999 Sportster Models using a 530 Chain.
• We also offer 51 Tooth rear sprockets as well as full conversion kits with a front sprocket and chain.

NOTE: This sprocket is made to bolt up to stock 1973-1999 Harley Big Twin Softail, Dyna, FXR, Touring & 1986-1999 Sportster rear wheels, however, the final fitment will be dependent upon many factors of your application, so please take measurements prior to making a purchase. If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion.

NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end.

NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration.

Finish:

• Chrome

Fitment:

• Fits 1973-1999 Harley Big Twin Softail, Dyna, FXR, Touring & 1986-1999 Sportster Models using a 530 Chain.