22 Tooth Belt-to-Chain Drive Conversion Front Transmission Sprocket with ½” Offset & Wheel Spacer

For 1985-1994 Harley FXR & 1986-1999 Harley Softail 5-Speed Models – Recommended for 530 Chain

Features:

• This 22 tooth Belt-to-Chain Drive Conversion kit with a .500 offset Sprocket includes a 3/16” wheel space.
• This is the front sprocket used on our popular Belt-to-Chain Drive Conversion Kit.
• You can swap out this front sprocket for different gearing for different applications.
• We also recommend using our flange nut to ensure that this sprocket is properly secured.
• Fits 1985-1994 Harley FXR & 1986-1999 Harley Softail Models (Recommended for use with a 530 Chain)

NOTE: These are made for use in a stock Sportster frame or a frame or hardtail which uses stock spacing (such as hardtails which use the stock rear wheel assembly, brake, and axle spacers). If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion.

NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end.

NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration.

Finish:

• Sprocket - Black Oxide
• Spacer - Chrome

Fitment:

• Fits 1985-1994 Harley FXR & 1986-1999 Harley Softail Models (Recommended for use with a 530 Chain)