For use with 1/4” ID hose and 3/8" NPT Bung. Replaces HD Part # 62125-55B
Features:
- Listing is for ONE (1) 90 Degree Filtered Petcock constructed of high grade Brass and Steel.
- Petcocks come chrome plated to look good for years to come.
- Works with early style 1966 - 1974 Harley Models and most custom tanks with a 3/8" NPT Bung.
- Male 3/8" NPT thread.
- 1/4" barb accepts 1/4" ID hose (Also available).
- "R" (Reserve), "ON" and "OFF" just like OEM.
- Designed to be used without O-Rings which typically dry up and leak over time.
- The built-in filter allows for extra protection against debri entering your fuel system while still providing maximum flow.
- NOTE: Please make sure that you have at least 2-3/8" from the bottom of the petcock bung and the nearest obstruction in your tank (Baffles etc).
- We also offer these Petcocks with STRAIGHT hose fittings as well as Female Internal 22mm thread for use with 1975 - 2006 models.
Dimensions:
- Overall Length = 3-3/4"
- "Face" Width = 2-1/8" (Including Hose Barb)
- Depth = 1-1/2"
- Thread = Male 3/8" NPT
NOTE: The Length from the bottom of the threads to the top of the filter is 2-3/8" (Please check to make sure that this will fit in your tank.)
Finish:
- Chrome Plated
Accommodates:
- Works with early style 1966 - 1974 Harley Models and most custom tanks with a 3/8" NPT Bung.
- Any tank with a 3/8" NPT bung and clearance for the filter inside the tank.
- A fuel hose with a 1/4" ID.
