1/4” Petcock with 90 Degree Elbow - Chrome, For Use with 1/4" ID Fuel Hose

(No reviews yet) Write a Review

For use with 1/4” ID hose and a 1/4" NPT Bung.


Can be used with GAS and GASONOL!


Perfect for a custom build...


• Listing is for ONE (1) 90 Degree Filtered Petcock constructed of high grade Brass and Steel.

• Petcocks come chrome plated to look good for years to come.

Works with custom tanks that feature a female 1/4" NPT Petcock Bung.

• Male 1/4" NPT thread.

1/4" barb accepts 1/4" ID hose (Also available).

• "R" (Reserve), "ON" and "OFF" just like OEM.

• Designed to be used without O-Rings which typically dry up and leak over time. 

• The built-in filter allows for extra protection against debris entering your fuel system while still providing maximum flow.

Please make sure that you have at least 2-3/8" from the bottom of the petcock bung and the nearest obstruction in your tank (Baffles etc).

 We also offer these Petcocks with STRAIGHT hose fittings.



Overall Length    =              3-3/4"

"Face" Width      =              2-1/8" (Including Hose Barb) 

Depth               =              1-1/2"

Thread              =              Male 1/4" NPT

The Length from the bottom of the threads to the top of the filter is 2-3/8" (Please check to make sure that this will fit in your tank.) 



Chrome Plated



Works with custom tanks with a 1/4" NPT Bung and clearance for the filter inside the tank.

A fuel hose with a 1/4" ID.