S&S Cycle® Raw 560S Series Cam for 1948-1969 Harley Models with Big Twin Engine - Made in U.S.A. - 33-509

$249.95

(No reviews yet) Write a Review

SKU:

33-5059

S&S Cycle® Raw 560S Series Cam - Made in U.S.A.

Fits 1948-1969 Harley-Davidson Models with Big Twin Engine

S&S CAMS
S&S Cams are tested on the dyno, street and track before being offered to the public
With hundreds of hours of testing on each cam, you know you are getting the best cam S&S can produce
Made in the U.S.A.
NOTE: Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe-to-case clearance.
450S CAM
For lower compression motors up to 88" with compression up to 8.5:1
Good low and mid-range torque
Recommend hydraulic lifters
508 CAM
S&S' best bolt-in cam
Works well in all size motors up to 10:1 compression
Quiet valve train
Provides best power in low to mid-range
510 CAM
S&S' best bolt-in cam
Ideal for engines to 96" up to 10:1 compression
No spring spacing required
Works with stock pushrods, springs and hydraulic tappets
514 CAM
For lower compression 84" to 93" motors, not more than 9:1
Best response from 2500 to 5000 rpm
Recommend solid or performance aftermarket hydraulic lifters
520 CAM