Internal Throttle for 1 " Handlebars with Aluminum Throttle Sleeve - for Rubber Grips

This is the smoothest operating internal throttle we've found....and we've tested them all!
No need to spend $200+ on an internal throttle. This throttle has more features than some of the $200+ options at a fraction of the price. There are six, yes six needle and ball bearings which creates an extremely smooth operation over competitors internal throttles. Throttle also features a spring-assisted return for added safety.

NOTE: Please measure the ID of your bars PRIOR to installation

Internal Throttle:

Features:

• The unique Needle and Ball Bearing Construction creates an extremely smooth operation over competitors internal throttles.
• Throttle also features a spring-assisted return for added safety.
• This kit uses three types of throttle bearings:
•       5/32" x 5/16" x 1/8"
•       3/8" x 7/8" x 9/32"
•       5/8" x 13/16" x 5/8"
• Comes with detailed installation instructions or you can see them on our installation page here.
• Basic Hand Tools required for proper installation.  (No Welding Required)
• The throttle side of the cable goes into a barrel in the throttle and is then secured with the provided set-screw.
• Custom Application for any bike with 1" Handlebars.
• The internal portion of the throttle slides into the handlebars just short of 2-1/2" (Roughly 2-5/16")
• Please measure the ID of your bars PRIOR to installation (The OD of the portion on the internal throttle measures .792")
• NOTE: May not work with dimpled bars. Check for clearance before installation (7-1/4" from the end of the bars).
• Grips not included

INSTALL NOTES: 

• Some OEM Harley handlebars have a thin sidewall and will need a split shim in order for the internal throttle to work.
• You will most likely need a longer cable to use with this internal throttle kit.
• You cannot run factory internal wiring with the internal throttle as it will "crash" into the wiring.

Throttle Sleeve:

Features:

• CNC machined from 6061 Aluminum.
• The throttle sleeve surface is knurled to properly secure your grips.
• The sleeve also comes with stainless steel set-screws to secure the sleeve to your internal throttle.
• Simply slide the sleeve over the throttle, tighten the set-screws and install your favorite set of rubber grips and you're good to go!

(OPTIONAL) Barnett® Internal Throttle Cable - Black Nylon - 53" Length

Features:

• Works great with our famous internal throttle kit.
• 53" total length (Cut to length design)
• Black nylon sleeve keeps your cables safe and working smoothly.
• Features a chrome adjuster.
• Comes with various barrel ends, fittings, pins and set screws.
• Made in USA

Dimensions:

Internal Throttle:

• Length (Overall)                -          7-1/4”
• Length (Internal Portion)    -          2-15/32"
• Length (External Portion)   -          4-3/4"
• OD (Internal Portion)         -           .792”
• OD (External Portion)        -           .998”

Throttle Sleeve:

• Length                       -          4-5/8”
• OD                            -           1-1/8”
• ID                             -           1.015”

Fitment:

• Custom Application for any bike with 1" Handlebars.
• Basic Hand Tools required for proper installation.  (No Welding Required)

INSTALL NOTES: 

• Please measure the ID of your bars PRIOR to installation (The OD of the portion on the internal throttle measures .792")
• Some OEM Harley handlebars have a thin sidewall and will need a split shim in order for the internal throttle to work.
• You will most likely need a longer than stock cable to use with this internal throttle kit.
• You cannot run factory internal wiring with the internal throttle as it will "crash" into the wiring.
• May not work with dimpled bars. Check for clearance before installation (7-1/4" from the end of the bars).