null

Custom Dynamics® Magic Strobes™ Plug-N-Play Tour-Pak Brake Light and Corner Flashers with 10 Strobe Patterns - Fits 2014-2019 Harley Road/Street Glide Models with Tour-Pak

$89.95
(No reviews yet) Write a Review
SKU:
MAGIC-STROBE-LTP2

Custom Dynamics® Magic Strobes™ Tour-Pak Brake Light & Corner Flasher with 10 Strobe Patterns

Riders can easily plug Magic Strobes™ into the stock harness and select from 10 flash & strobe patterns by simply spinning the built-in dial.

Features:

  • Applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn.
  • NOTE: To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.
  • Over-current/thermal/short circuit/reverse wiring protection.
  • 84W, 12V system.
  • Sealed weather-tight case.
  • WORKS WITH LED's ONLY
  • Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2019 Electra Glide®, Ultra, Road Glide® Ultra, and Tri Glide® models including CVO™ 
  • This unit will strobe the Tour-Pak only and can be used with or without the Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.
  • 5 Year Warranty

Patterns:

  • Pattern 0: Four Flashes then Solid
  • Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat
  • Pattern 2: Seven Flashes then Solid
  • Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat
  • Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe
  • Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
  • Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
  • Pattern 7: Custom LED Blaster X Cycle, Repeat
  • Pattern 8: Max Strobe 4 Seconds, Solid
  • Pattern 9: No Pattern

Finish:

  • Black

Dimensions:

  • Length              -           4.2"
  • Width               -           1.4”
  • Height              -           .6"

Fitment:

  • Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2019 Electra Glide®, Ultra, Road Glide® Ultra, and Tri Glide® models including CVO™ 
  • NOTE: Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of Tour-Pak LED to flash/strobe when brake is applied.

  •  

    NOTE:  When used in conjunction with SMART Triple Play BCM® on 2014-2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ the center brake only section of the Tour Pak will flash/strobe when the brake is applied. The corner sections will function as run/turn signal only. 
  • Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.
  • *Requires the use of LED bulbs in the rear. 
  • Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.