Tecmate Optimate Test Battery and Charging System/Alternator Tester - TS-121

Fast, accurate and professional on-vehicle testing of 12V batteries and charging systems

Features:

Connect clips to the battery or connect to an installed SAE battery lead, then:

• 1. Check battery charge level. A low battery cranks (starts engine) poorly.
• 2. Start engine. OptiMate TEST records and indicates (for 20 sec) the lowest start volts.
• 3. With engine running, verify charging voltage from alternator and voltage regulator.

TIP: Low charge voltage causes poor battery performance. Too high charge voltage causes excessive gassing and will eventually damage a lead-acid battery. Too high charge voltage is FATAL for a LiFePO4 starter battery!

• 3-year limited replacement warranty.
• Checks battery voltage to provide an indication of battery health; checks battery starting power and checks charging system without disassembly by indicating low charging voltage.
• Connect directly to the battery or live 12V outlet.
• Battery clips are removable and replaceable.
• Includes two cable straps, adhesive hook-and-loop straps and screws for use if mounting the removable backplate into an enclosure.
• The ultimate pocket tester for on-vehicle battery performance & alternator voltage testing that every service technician or gear head should have! Easy to use!
• Microprocessor accuracy; Fully sealed.
• 40″ / 100cm battery clip set.
• Industry standard SAE 2-pin connector.
• Easy to follow instructions on rear panel of the tester.

Included Items:

• Tester with 8" cord and male/female bullet connector.
• (1) 30 in. wire with (2) clips and (1) male/female bullet connector
• Instructions

Dimensions:

• Height              =         2 1/2"
• Width               =         3"
• Depth               =         7/8"        
• Cord                 =         8"   

Fitment:

• ALL 12 Volt Batteries