null

Belt-to-Chain Conversion Kit - Fits 2000-2017 Harley Sportster XL Models - 23 Tooth Front Sprocket / 48 Tooth Rear Sprocket for 530x120 Chain

$180.00
(No reviews yet) Write a Review
SKU:
19-0763

Belt to Chain conversion kit - 23/48

Fits 2000-2017 Harley Sportster XL models while maintaining the stock gearing ratio.

Features:

  • Black 23 tooth front sprocket with a .500" offset.
  • Includes sprocket nut with locking holes to ensure that the sprocket stays tight.
  • 48 tooth rear sprocket with a 9.8mm offset (Includes wheel spacer with 2.25" ID)
  • 530 x 120 Chain Options:
    • DID "Standard" OEM Replacement (Non O-Ring) Chain - 6,600lb Tensile Strength - Natural Finish $59.99
    • Drag Specialties O-Ring Chain - 9,500lb Tensile Strength - Chrome Finish $118.95
    • EK ZVX3 X-Ring Chain - 11,100lb Tensile Strength - Gold Finish $187.95
  • Designed to fit 2000-2017 Harley Sportster XL models while maintaining stock gearing ratio.
  • Also available for other years and models.

NOTE: These are made for use in a stock Sportster frame or a frame or hardtail which uses stock spacing (such as hardtails which use the stock rear wheel assembly, brake, and axle spacers). If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion.

NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end.

NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration.

Finish:

  • Front Sprocket - Black
  • Rear Sprocket - Chrome

Fitment:

  • Designed to fit 2000-2017 Harley Sportster XL models while maintaining stock gearing ratio.